CUES 9-Speed Shifter/Deore 11-Speed Derailleur/10-Speed Cassette
| Shifter: | CUES 9-Speed | (SL-U4000) |
|---|---|---|
| Derailleur: | Deore 11-Speed | (RD-M4120) |
| Reviews: | Tell me about reviews! Send an email to hello@drivetrainbuilder.com. | |
| Speeds: | 9 | Use these numbers on a website like gear-calculator.com to find gearing that suits you and is compatible with this combo. |
| Max Tooth: | 42 | |
| Chain Wrap: | 41 | |
These combinations are not supported by the manufacturer. Use at your own risk.
This combination has more cogs than shifts. You will not be able to shift to all cogs on this cassette.
Cassettes
| Cassette | Part Number | Support |
|---|---|---|
| Generic 10-Speed | generic-10-speed | Not Supported |
| LinkGlide 10-Speed | CS-LG300-10 | Not Supported |
| Shimano 10-Speed | CS-HG-500-10 | Not Supported |
| SRAM 10-Speed | CS-PG-1050-A1 | Not Supported |
Compatibility Analysis
Show Compatibility AnalysisEach click of the shifter will move the jockey by 3.83 mm on average. Manufacturers generally to target a cog pitch that is between 0.7% smaller to 6.9% larger than this number.
In practice, no groupset aligns the jockey wheel perfectly for every shift. Manufacturers generally allow the chain to make up to a 1.2° angle from the jockey wheel to the cog.
| Pull Ratio: | 1.07 |
|---|---|
| Cable Pull: | 3.56 mm |
| Minimum Cog Pitch: | 3.80 mm |
| Maximum Cog Pitch: | 4.09 mm |
| Maximum Chain Angle: | 1.2° |
Generic 10-Speed
Cog Pitch Versus Average Shift
The cog pitch of a Generic 10-Speed cassette is 3.95 mm, which is 3.1% larger than the average shift. This value is within the typical range for measured groupsets.
Worst Case Misalignment
This combination with a Generic 10-Speed cassette puts the chain at up to a 0.0° angle to the cog. This amounts to a sideways difference of 0.00 mm between the jockey wheel and the cog. This value is within the typical range for measured groupsets.
(Positions and angles are exaggerated for illustration. Numbers do not include the free play resulting from the cog being thinner than the rollers.)
Cog Positions vs Jockey Positions
LinkGlide 10-Speed
Cog Pitch Versus Average Shift
The cog pitch of a LinkGlide 10-Speed cassette is 4.05 mm, which is 5.5% larger than the average shift. This value is within the typical range for measured groupsets.
Worst Case Misalignment
This combination with a LinkGlide 10-Speed cassette puts the chain at up to a 0.7° angle to the cog. This amounts to a sideways difference of 0.40 mm between the jockey wheel and the cog. This value is within the typical range for measured groupsets.
(Positions and angles are exaggerated for illustration. Numbers do not include the free play resulting from the cog being thinner than the rollers.)
Cog Positions vs Jockey Positions
Shimano 10-Speed
Cog Pitch Versus Average Shift
The cog pitch of a Shimano 10-Speed cassette is 3.96 mm, which is 3.3% larger than the average shift. This value is within the typical range for measured groupsets.
Worst Case Misalignment
This combination with a Shimano 10-Speed cassette puts the chain at up to a 0.0° angle to the cog. This amounts to a sideways difference of 0.00 mm between the jockey wheel and the cog. This value is within the typical range for measured groupsets.
(Positions and angles are exaggerated for illustration. Numbers do not include the free play resulting from the cog being thinner than the rollers.)
Cog Positions vs Jockey Positions
SRAM 10-Speed
Cog Pitch Versus Average Shift
The cog pitch of a SRAM 10-Speed cassette is 4.05 mm, which is 5.5% larger than the average shift. This value is within the typical range for measured groupsets.
Worst Case Misalignment
This combination with a SRAM 10-Speed cassette puts the chain at up to a 0.7° angle to the cog. This amounts to a sideways difference of 0.41 mm between the jockey wheel and the cog. This value is within the typical range for measured groupsets.
(Positions and angles are exaggerated for illustration. Numbers do not include the free play resulting from the cog being thinner than the rollers.)