SX 12-Speed Shifter/SX 12-Speed Derailleur/12-Speed Cassette
| Shifter: | SX 12-Speed | (SL-SX-1-A1) |
|---|---|---|
| Derailleur: | SX 12-Speed | (RD-SX-1-B1) |
| Speeds: | 12 | Use these numbers on a website like gear-calculator.com to find gearing that suits you and is compatible with this combo. |
| Max Tooth: | 50 | |
| Chain Wrap: | 40 |
This combination is supported by the manufacturer.
Cassettes
| Cassette | Part Number | Support |
|---|---|---|
| Eagle 12-Speed | CS-PG-1210-A1 | Supported |
Compatibility Analysis
Show Compatibility AnalysisEach click of the shifter will move the jockey by 3.50 mm on average. Manufacturers generally to target a cog pitch that is between 0.7% smaller to 6.9% larger than this number.
In practice, no groupset aligns the jockey wheel perfectly for every shift. Manufacturers generally allow the chain to make up to a 1.2° angle from the jockey wheel to the cog.
| Pull Ratio: | 1.08 |
|---|---|
| Cable Pull: | 3.25 mm |
| Minimum Cog Pitch: | 3.47 mm |
| Maximum Cog Pitch: | 3.74 mm |
| Maximum Chain Angle: | 1.2° |
Eagle 12-Speed
Cog Pitch Versus Average Shift
The cog pitch of a Eagle 12-Speed cassette is 3.65 mm, which is 4.2% larger than the average shift. This value is within the typical range for measured groupsets.
Worst Case Misalignment
This combination with a Eagle 12-Speed cassette puts the chain at up to a 1.0° angle to the cog. This amounts to a sideways difference of 0.55 mm between the jockey wheel and the cog. This value is within the typical range for measured groupsets.
(Positions and angles are exaggerated for illustration. Numbers do not include the free play resulting from the cog being thinner than the rollers.)